Strep B Rapid Test

Strep B Rapid TestProduct overview Test results within 10 minuts Relative sensitivity: 97. 4 % Relative specificity: 98 % Test kit containing 20 test cassettes Incl. swabs, disposable pipettes and reagents Strep B Rapid Test The Strep B rapid test is easy to carry out and suitable for detecting Group B streptococci in women. To perform the test, you only need a vaginal or rectal swab from the patient. The sample is then tested with help of the included reagents and

• Test results within 10 minuts
• Relative sensitivity: 97.4 %
• Relative specificity: 98 %
• Test kit containing 20 test cassettes
• Incl. swabs, disposable pipettes and reagents

Strep B Rapid Test

The Strep B rapid test is easy to carry out and suitable for detecting Group B streptococci in women. To perform the test, you only need a vaginal or rectal swab from the patient. The sample is then tested with help of the included reagents and extraction solution. The test results can be read on the test cassette after 10 minutes.

To make sure that the test procedure has been followed correctly, the Strep B test is equipped with a control line, which minimises the risk of incorrect measurements caused by e.g. a too small amount of sample material.

Product Details

• Strep B rapid test
• Easy to use
• Sample material: vaginal or rectal swab
• Test results within 10 minutes (at a room temperature between 15 and 30 °C)
• Quick and reliable
• Relative sensitivity: 97.4 %
• Relative specificity: 98 %
• Analytical sensitivity: 4500 KbE/ml
• No cross-reactivity with Strep A, campylobacter fetus, campylobacter jejunii, E. coli
• Can be used directly in your surgery
• Delivery contents: 1 pack with 20 Strep B tests, reagents, sterile swabs, reaction vessels, single-use pipettes, instructions for use

Test Procedure

• Take a sample from the vaginal entrance and rectum
• Add 12 drops of extraction buffer to the reaction vessel
• Add the swabs to the vessel and swivel for 15 seconds
• Leave the swabs in the vessel at room temperature for 10 minutes
• Swirl the swabs in the solution
• Press the swabs to the wall of the vessel to get the residual liquid out, then remove the swab
• Use the disposable pipette to add 3x1 drops of the solution to the cassette
• Wait after each drop until it has been absorbed
• If the second drop hasn't been absorbed after 30 seconds, add buffer instead
• The test results can be read after 10 minutes